Brushless DC gear motors are still widely used in the machinery industry, which is also mainly due to its excellent performance. As the use of this motor becomes more and more widespread, it is still important to do a good job of protection during the use of the equipment. How to prevent the equipment motor from being burned is a problem that manufacturers and users are concerned about. Let's learn about some specific protection measures.
1. If the voltage is too low or the driven machinery is stuck, etc., it will cause the motor to run overloaded. Therefore, it is necessary to keep the working current of the DC brushless geared motor too large.
2. It is necessary to check and repair the control equipment of the geared motor regularly, which plays a decisive role in the normal start of the motor. Therefore, the motor control equipment should be located in a dry, ventilated and easy-to-operate location, and dust should be removed regularly.
3. Make the geared motor hygienic. The motor will form a short-circuit medium during operation, which may damage the wire insulation, causing the temperature of the inter-turn short-circuit current to rise and burn the motor. Therefore, it is very important to do a good job of dust-proof treatment on a regular basis to keep the equipment clean.
4. Shut down immediately if you smell the peculiar smell. During the operation of the DC brushless geared motor, we must pay attention to observe whether the motor has vibration, noise and abnormal odor. If an abnormal situation is found, the power should be cut off in time to deal with it to avoid more unnecessary troubles in the later period.
The above four introductions are the protective measures taken to prevent the equipment from being burned during the daily use of the DC brushless geared motor. In order to ensure the working efficiency of the motor, regular maintenance work is also indispensable.
www.dw-motor.com