In the process of using a DC motor, the motor will occasionally burn out, so how to solve this problem? Or what are the six measures to prevent the DC motor governor from burning out? Please see our summary of this issue below:
1. When installing, connecting, and debugging the professional and technical personnel of DC motor speed controllers, they cannot install, remove or replace the equipment line when the power is on.
2. Be sure to install necessary protection devices between the power input end of the DC motor and the power supply (battery) to avoid dangerous accidents or fatal injuries; need to install: overcurrent protector, insurance, emergency switch.
3. Do a good job of isolation and insulation protection from the earth and equipment.
4. If live debugging is really needed, use a non-metal special screwdriver or special debugging tool with good insulation.
5. It needs to be installed in a well-ventilated environment.
6. It cannot be directly used in abnormal environments with high humidity, dust, corrosive gas, and strong vibration.
The DC speed regulator is a device that adjusts the speed of a DC motor. The upper end is connected to an AC power source, and the lower end is connected to a DC motor. The DC speed governor converts the AC power into two output DC power sources, one input to the DC motor (stator), and the other Input to the armature (rotor) of the DC motor, and the DC speed regulator adjusts the speed of the DC motor by controlling the DC voltage of the armature.
www.dw-motor.com