We have actually said a lot about the related knowledge of DC motors. I believe that everyone has a certain knowledge and understanding of DC motors. Then we will talk with you about the wear of worm gears of DC motors. The details are as follows Show:
When the motor is running normally, the worm is like a hardened "file", constantly filing the worm wheel, causing wear and tear on the worm wheel. Generally speaking, this kind of wear is very slow, and the general worm gear can be used for more than 10 years. If the wear rate is fast, it is necessary to consider whether the selection of the worm gear is correct, whether there is overload operation, the material of the worm gear, the assembly quality or the use environment and other reasons.
The reason for the wear of the worm gear of the DC motor is that the gear is not soaked by the lubricating oil during installation, and the lubrication is not enough. Avoid this problem during installation, otherwise it will cause the loss of lubricating oil between the motor and the motor when the DC motor stops running, the gears will not get the proper lubrication protection, and the worm gears and gears will not be effectively lubricated when running again. Cause mechanical wear and even damage.
Therefore, worm gear is a relatively important accessory for DC motors. When wear occurs, lubricating oil can be used for lubrication, which can reduce its wear level and improve the efficiency of equipment.
www.dw-motor.com