1. Accelerate and decelerate, which is often referred to as a variable speed gearbox.
2. Change the transmission direction, for example, we can use two sector gears to transmit the force vertically to the other rotating shaft.
3. Change the rotating torque. Under the same power condition, the faster the speed of the gear, the smaller the torque on the shaft, and vice versa.
4. Clutch function: We can achieve the purpose of separating the engine from the load by separating the two originally meshed gears. For example, the brake clutch, etc.
5. Distribution of power. For example, we can use one engine to drive multiple slave shafts through the main shaft of the gear box, so as to realize the function of one engine driving multiple loads.
The working principle of the gear box:
gear box is used to change speed and reduce speed Gearboxes or geared motors are mostly geared. The principle is that a big gear with a small gear or a small gear with a big gear can be seen from the above introduction: once the gear ratio is selected, the gearbox cannot be changed. Can speed and change the transmission direction.