The DC gear motor provides low speed and large torque, which brings convenience to our life. Among them, in the use method of the equipment, in order to give full play to the use efficiency of the equipment, the correct wiring method is very important. , in order to facilitate everyone's understanding and use, the following is an introduction to its wiring method.
1. For the power input of the DC gear motor, the thick red line is the positive end of the power supply, the black line is the negative end of the power supply, and the thin orange line is the electric door lock.
2. Motor phase (u, v, w output), the thick yellow line is U, the thick green line is V, and the thick blue line is W.
3. Input the signal, the thin red wire is +5V power supply, the thin green wire is the handle signal input, and the thin black wire is the ground wire.
4. Machine hall (A, B, C input), the thin red wire is +5V power supply, the thin black wire is the ground wire, the thin yellow wire is A, the thin green wire is B, and the thin blue wire is C.
5. Sensor, the thin red wire is +5V power supply, the thin black wire is the ground wire, and the thin green wire is the sensor signal input.
The wiring method of the DC geared motor is very familiar as described above, so the user must follow its operation method when wiring, so as to ensure the use of the motor.
www.dw-motor.com